AMFLO 4 - 25E - RET YELLOW 200 PSI NYLON RECOIL AIR HOSE 1/4" X 25' WITH 1/4" MNPT SWIVEL END FITTINGS

SPECIFICATIONS

Brand Name	Amflo
Part Number	4-25E-RET
Inside Diameter	0.25  inches
Overall Length	25.0  feet
Max Pressure	200  PSI
LowerTemperature Range	32  Degrees Fahrenheit
Upper Temperature Range	120  Degrees Fahrenheit
Color Name	Yellow
UPC	087817555664
Connection Size	1/4 inches

Connector Type	MNPT Swivel
EAN	0087817555664
Inlet Connection Size	0.25  inches
Inlet Connection Type	Npt Male Swivel
Item Weight	0.6 pounds
Material Type	Nylon
Pkg Qty	1
UNSPSC Code	40142002
Wall Thickness	0.5  inches

The Amflo 4-25E-RET Yellow Nylon Recoil Air Hose has a 1/4" ID and is 25 ft. long. Its tube and cover are made of yellow nylon for resistance to moisture absorption, abrasion, fatigue, and chemicals. Its braided nylon reinforcement provides the strength necessary to reach and maintain its maximum pressure rating of 200 pounds per square inch (psi). It is capable of functioning effectively at temperatures ranging from 32 to 120 degrees F, and comes equipped with two 1/4" factory-installed, brass male National Pipe Thread Taper (NPT) swivel fittings with steel bend restrictors that reduce twisting and bending, increasing the life of the hose. This hose is manufactured as a lighter-weight alternative to bulkier rubber and plastic hoses for use in a wide range of industrial applications, such as manufacturing, auto repair, robotics, and others.
Shop Amazon - Gift Ideas in Industrial & Scientific

Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method:

S = Size (ID, OD, and length)

T = Temperature (maximum and minimum temperatures of material being transported)

A = Application (industry or process)

M = Material (to be conveyed, type and concentration)

P = Pressure (maximum working pressure)

E = Ends (type of end connectors or couplings on hose)

D = Delivery method (volume and velocity)

The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. Some applications require specialized oils or chemicals to be conveyed through the system. In this case, hose selection must ensure compatibility of the hose tube, cover, couplings and O-rings with the fluid used. Industrial hoses are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.

Plews and Edelmann manufactures automotive and pneumatic hose, lines, reels, accessories, fittings, and lubricants under the Edelmann, Amflo, Omega, LubriMatic, and UltraLube brands. The company, founded in 1909, is headquartered in Dixon, IL.Shop Amazon - Top Rated in Industrial & Scientific


FEATURES –

• Coiled nylon air hose for a wide range of commercial and industrial applications.
• Yellow nylon tube and cover for resistance to moisture absorption, abrasion, fatigue, and chemicals.
• Braided nylon reinforcement for strength.
• Temperature range of 32 to 120 degrees F.
• Two 1/4" factory-installed, brass male NPT swivel fittings with steel bend restrictors.

SAMPLE CUSTOMER REVIEWS –

1) Inexpensive, durable and very handy. - I use this with a small, 5 gallon portable air tank that I fill off my compressor. Works great to power an airnailer for a small job in a hard to reach place - just carry the little tank and this little hose is just right sized and gets the job done. Fantastic for anywhere you might need a real compact hose that does not get in the way.

By jonathon patrick zink on November 18, 2012

2) Good product, Great Price, Excellent Value - I used this for some time now and really prefer it over a non-coiiled air line. It neatly sits out of the way when coiled and has lasted several years now. Somewhat a long term review here. I didn't realize it was on my "to review" list.

By TexasHonda on June 14, 2014

For More Details-

(CLICK here)
Amflo 4-25E-RET Yellow 200 PSI Nylon Recoil Air Hose 1/4" x 25' With 1/4" MNPT Swivel End Fittings

AMT PUMP 2874 - 95 SELF - PRIMING CENTRIFUGAL PUMP , CAST IRON , 3 HP , 3 PHASE , 208 - 230/460 V, CURVE A, 3" NPT FEMALE SUCTION AND DISCHARGE PORTS

This AMT self-priming centrifugal pump has a cast iron housing and 3" female NPT suction and discharge ports. The pump is self-priming to 20 vertical feet (after initial fill) with its built-in check valve, and its clog-resistant impeller handles semi-solids up to 3/8" diameter. The pump housing has buna-n mechanical seal and O-ring, a fill and drain plug for easy servicing, and a double volute chamber for reduced radial load on the impeller. The motor enclosure is TEFC (totally enclosed, fan cooled) for protection from dust and indirect water spray and complies with National Electrical Manufacturers Association (NEMA) 56J standard for mounting dimensions. This pump is suitable for use in applications such as wastewater processing and treatment.

Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.

American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA.

IT'S FEATURES:

• Clog-resistant impeller handles semi-solids up to 3/8" diameter for use in waste water drainage and processing.
• Built-in flapper/check valve permits self-priming to 20 feet.
• Cast iron with buna-n mechanical seal and O-ring.
• Maximum operating temperature 180 degrees F.
• 3" female NPT suction port, 3" female NPT discharge port.

For More Details-

(CLICK here)
AMT Pump 2874-95 Self-Priming Centrifugal Pump, Cast Iron, 3 HP, 3 Phase, 208-230/460 V, Curve A, 3" NPT Female Suction & Discharge Ports